引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1349次   下载 2 本文二维码信息
码上扫一扫!
分享到: 微信 更多
对转压气机三维掠动叶优化设计
曹志远, 刘波, 张国臣, 杨小东, 陈得胜, 李俊
西北工业大学 动力与能源学院,陕西 西安 710072
摘要:
为探索三维掠动叶降低对转压气机二次流损失的潜力,进一步提高对转压气机气动性能,基于近似函数与遗传算法,针对某对转压气机双排转子在整机环境下进行三维掠动叶优化设计,并对优化前后流场进行对比分析。优化成功的得到了双排“S”形掠动叶,结果表明:三维掠动叶有效改善了双排动叶吸力面径向二次流,减小了吸力面低速区,提高了对转压气机性能,优化工况点整机效率提高0.6%,全工况范围内效率均有所提高;三维掠动叶提高对转压气机效率的根本原因是其对径向负荷分配的重新调整,将叶展下方流动较差区域负荷移至叶展上方,改善流场的同时保证对转压气机负荷不变。 
关键词:  压气机  对转技术  三维掠动叶  优化设计  二次流  流动损失  压气机效率 
DOI:
分类号:
基金项目:国家自然科学基金(51236006)。
Three Dimensional Swept Rotor Blade Optimization Design for a Counter-Rotating Compressor
CAO Zhi-yuan, LIU Bo, ZHANG Guo-chen, YANG Xiao-dong, CHEN De-sheng, LI Jun
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072,China
Abstract:
Based on function approximation and genetic algorithm,three dimensional swept rotor blade optimization design was conducted on the rotors of a counter-rotating compressor. The purpose of the paper is to explore the potential of reducing the secondary flow losses and hence to improve the overall performance of the counter-rotating compressor. Two rows of swept rotor blades with the shape of S were obtained from the optimization process, and then numerical simulation was carried out to identify the effectiveness of the optimization. The results demonstrate that three dimensional swept rotor blades effectively reduce both the radial secondary flows and low velocity areas around the suction side of the two rows of swept rotor blades. Furthermore, the efficiency of the counter-rotating compressor is increased by 0.6% at the optimization point, and it is also increased at all the other operating points. The reasons accounting for the efficiency improvement lie in that three dimensional swept rotor blades create a redistribution of the radial blade loadings by transferring the blade loadings from the bottom region with high losses to the top region, and in this way the flow field is improved while maintaining the blade loadings constant. 
Key words:  Compressor  Counter-rotating technique  3D swept rotor blade  Optimization design  Secondary flow  Flow loss  Compressor efficiency

分享按钮